Stage monitors
Coaxial floor wedges voiced like the mains. M6 and M14 sit on the same linear target curve as the front-of-house system, so what the artist hears is what the room hears.
Coaxial, so the source does not move
Both wedges are coaxial: low and high frequencies leave from the same point. A performer who steps sideways hears the same tone, which is what ends the "something changed" conversation halfway through a set.
Low enough to see over, loud enough to be heard
A floor wedge has to clear sightlines and survive a drummer. The M6 is the compact answer for tight stages and side fill; the M14 is the 13.5-inch high-output wedge for loud bands and long sets.
Rack-amplified, not powered
There is no amplifier in the wedge. Monitor amplification lives in the rack with everything else, so one A-series amplifier feeds several wedges, the stage stays quiet and cool, and a failure is a rack channel instead of a dead cabinet.
Common questions
What is a stage monitor?
A loudspeaker aimed at the performer rather than the audience — a floor wedge in most cases. Its job is a clear, consistent reference at high level without feeding back into the microphones in front of it.
Do you make powered stage monitors?
No. Quint wedges are passive, driven by A-series amplifiers under P-series presets. One six-channel A6 feeds six wedges from a rack you can cool and service, instead of six amplifiers living on a hot, vibrating stage.
What size wedge do I need?
M6 for compact stages, monitor fill and speech; M14 where a band plays loud and the wedge has to keep up with a drum kit. Most riders are covered by a mix of the two.
Why coaxial for monitors?
Because performers move. With a coaxial driver the acoustic source stays in one place across the whole range, so tone does not change as they step sideways off the axis.
Can I use the same preset as the mains?
Each cabinet has its own factory preset, tuned to that cabinet. They share the target curve, which is why the wedge and the mains agree — but the preset is per model.
Plan your system with us
Send a floor plan or a rider and our engineers come back with a modelled design: cabinets, amplifiers, presets and coverage.




