PA subwoofers
Ten inches to twenty-one, for touring and installation. Every Quint PA sub has its own factory preset, and every one is driven from a rack rather than from a plate amplifier bolted to the cabinet.
Pick by pressure, not by size
B10 under a bar, B15 and B18 for compact rigs, B21 and Rsub where the floor has to move. The cabinet that fits the space is not always the cabinet the room needs, so we model both before quoting.
Rack-amplified, not powered
Quint subwoofers are passive. Amplification and DSP live in a rack where they can be cooled, serviced, monitored and re-presetted, and where one A-series amplifier drives several cabinets. A powered sub puts its electronics in the one place in the room with the most vibration and the least airflow.
Protected by the preset
Excursion and thermal limiting come from the factory preset in the P-series processor, tuned per cabinet. That is what lets a subwoofer sit at the top of its range all night without the driver paying for it.
Where to start
Common questions
What is a PA subwoofer?
The low-frequency cabinet of a PA system, typically covering everything below 80–100 Hz so the tops can concentrate on the rest. In a Quint system the crossover point comes from the factory preset, not from a knob.
Do you make powered PA subwoofers?
No, and deliberately. Quint subwoofers are passive and driven by A-series amplifiers under P-series processing. You get better cooling, one place to service, one amplifier across several cabinets, and presets you can update without opening a cabinet.
How many subwoofers do I need?
Enough for even pressure across the audience, which is usually more than one per side. Placement matters as much as count; we model both.
What is the difference between an 18-inch and a 21-inch sub?
Reach and displacement. A 21-inch cabinet goes lower and moves more air for the same count; an 18-inch is smaller, lighter and often the better fit in a room that does not need the bottom octave.
Left-right, centre, or an array?
Left-right is simplest and often uneven across the floor. A centre cluster or a sub array evens it out, and cardioid keeps it off the stage. It depends on the room, which is why we model it.
Plan your system with us
Send a floor plan or a rider and our engineers come back with a modelled design: cabinets, amplifiers, presets and coverage.




